ATLAS SAM 100 is a self-levelling anhydrite jointless floor, suitable for machine making of rough floor inside buildings (in dry rooms), under terracotta and floor covering of different kind. It can be poured manually, but only on surfaces divided into technological fields, assuming a field's surface which can be poured within 30 minutes. It is suitable for all kinds of residential rooms and for public buildings. It is recommended that the thickness of one layer of the jointless floor should be from 0.5 to 3.0 cm. ATLAS SAM 100 can be applied as a connected jointless floor.

ATLAS SAM 150 is a self-levelling, quick-setting anhydrite jointless floor, suitable for machine making of rough floor inside buildings (in dry rooms), under terracotta and floor covering of different kind. It can be poured manually, but only on surfaces divided into technological fields, assuming a field's surface which can be poured within 30 minutes. It is suitable for all kinds of residential rooms and for public buildings. It is recommended that the thickness of one layer of the jointless floor should be from 1.5 to 6.0 cm. ATLAS SAM 150 can be applied as a connected jointless floor, jointless floor on a separation layer, floating jointless floor or in floor heating systems (due to its good heat conductivity and good insulation of heating pipes).

ATLAS SAM 200 is a self-levelling anhydrite jointless floor, suitable for mechanical making of rough floor inside buildings (in dry rooms), under terracotta or floor covering of various kinds. It can be poured manually, but only on surfaces divided into technological fields sized 10 - 15 m2. It is suitable for all kinds of residential rooms and for public buildings. It is recommended that the thickness of one layer of the jointless floor should be from 2.5 to 6.0 cm. ATLAS SAM 200 can be applied as a connected jointless floor, jointless floor on a separation layer, floating jointless floor or in floor heating systems (due to its good heat conductivity and good insulation of heating pipes).

TERPLAN N is a self-levelling cement mass, designed for levelling and adjusting surfaces made of concrete, cement and anhydrite jointless floors inside buildings, to be used under floor covering made of PVC, carpeting, parquet, floor panels, terracotta, stone, natural marble. TERPLAN N can be used to achieve even surfaces both in new buildings and in modernised existing buildings. The thickness of one layer of subfloor should be from 2 to 10 mm.

TERPLAN R is a product suitable to be used for mechanically or manually making rough floors inside buildings, under terracotta or floor covering of various kinds (PVC, carpeting, parquet, floor panels, terracotta, stone, marble). It is a self-levelling cement mass, designed for levelling and adjusting the surfaces made of concrete, cement and anhydrite jointless floors as well as of other rigid and hard substrates, or for "difficult surfaces" including vinyl, ceramic, PVC, natural stone or terrazzo substrates. ATLAS TERPLAN R may be used as a connected subfloor or as a subfloor on a separation layer. TERPLAN R may be used to obtain even surfaces both in new buildings and in modernised existing buildings, in both residential and public buildings. The thickness of one layer of subfloor should be from 5 to 30 mm.